VITO T SERIES - CLEANING

Use water and soap to clean the tank and hose

How to clean VITO T

Wear gloves and secure the brakes!

1. fill a sink with water and neutral soap.

2. Press "POWER" and "IN". Make sure that the switch handle is on the "IN" position. Suck     in the soap-water mixture.  

    OR pour a bucket of water and soap directly into the tank.

3. Press ''POWER'' and ''OUT'' (Make sure the lever is in the right position!).

4. Clean the inside as shown in the video.

5. Flush the system - Set VITO on ''OUT'' and place the lance/hose in the tank. 

6. Pump the used water back into the sink - Press "POWER" and "OUT".

7. Rinse the system with clean water until the soap is completely removed.

8. Clean the surface and the lid e.g. with a stainless steel cleaner. 

How to empty the VITO T series 

Remove the star grip on the underside of your VITO T to drain off any remaining liquid.

Make sure that the sealing is still in place when the star grip is reinserted. Tighten the star grip only hand-tight.